Polyaluminum chloride is greatly affected by temperature and PH value
Sales of polyaluminum chloride, polyaluminum chloride content, polyaluminum chloride content, polyaluminum chloride content are 23,30, these are broad categories, the specific consultation is TEL, Bozhiyuan Net Materials Co., Ltd. has polyacrylamide,....
There are many factors that need to be considered in the use of polyaluminum chloride, but most of the issues that need to be considered when purchasing polyaluminum chloride, such as the selection of polyaluminum chloride models, the content of polyaluminum chloride, etc. Wait, some precautions in the use of polyaluminum chloride together, today I will introduce two notes for the practical use of polyaluminum chloride.
The temperature of sewage treatment by polyaluminum chloride is one of the important factors. When polyaluminum chloride is used in sewage treatment, the effect of flocculation will change with the change of water temperature. Under normal circumstances, polyaluminum chloride has a very good flocculation effect at room temperature. The activated carbon of polyaluminum chloride in sewage treatment will increase with the increase of temperature, but it is not that the higher the temperature, the better the flocculation effect of polyaluminum chloride. After the temperature is increased, the alum polymerized and aluminum chloride flocculated The flowers will become smaller and cannot achieve the effect of rapid precipitation. The polyaluminum chloride also has a good effect in a low temperature environment, but when the temperature is below zero degrees Celsius, the polyaluminum chloride begins to lose activity, and the effect of flocculation is basically not. Therefore, whether it is summer or winter, polyaluminum chloride needs to have a suitable use temperature.
The PH value of sewage treated with polyaluminum chloride is also a key factor affecting the flocculation effect. Generally speaking, polyaluminum chloride has a flocculation effect between PH values of 5-10, but generally in order to ensure a better effect, the PH value needs to be between 6-9. Because the PH value of sewage generally fluctuates greatly, it is necessary to timely measure to adjust the PH value of sewage to ensure the use effect of polyaluminum chloride.
The Quality Management System of the above organization has been assessed
GB/T19001-2016 idt ISO9001:2015
Scope of this management Certification
Sales and after-sales services of chemical products（Sodium Dichloroisocyanurate (SDIC),Sodium
Dichloroisocyanurate Dihydrate,Trichloroisocyanuric Acid (TCCA),Cyanuric Acid,Calcium Hypochlorite,BCDMH）
and Fertilizer(Seaweed Fertilizer,Chitosan)